Wanted Victory Pro Pipe

[gixxerp]

as per title im after a victory pro pipe if anyone has one for sale. cheers

[harryhackenbacker]

Will that work with your new engine

[gixxerp]

cant see why not, very similar pipe, but will check with Stevo.Simon has his on the buggy and the fit is much better, better quality, prefer the way its mounted to the manifold and it sounds absolutely awesome specialy on the overun

[harryhackenbacker]

Paul the Pro pipe was designed for the high reving 27.2 jobs ,no bottom in them , Simon has a victory
std pipe I sold him ,bottom exit though ,which will work much the same as a Samba , thats why I asked 

[RossMod]

If the Engine is a evotuning Engine I do not recomend the pro pipe, these where desgined for mainly standard engines and not tuned engines, we have tested the pipes with my engines and they did not work very well on low end, excellent pipe for a standard engine. and they do like to rev

[gixxerp]

i thought it was a pro pipe . so will a standard vrc pipe work ok on evo engine?

[dgav407]

Paul, the standard VRC will work with stock and tuned engines, irrespective of the cc. The Pro Pipe likes a high revving 4-bolt head tuned engine, it has a poor low end compared to the standard VRC and Samba pipes but the top end is mental.

I briefly used my Stage 3 smooth 28.5cc evo.tuning engine with the Pro Pipe and the results weren't good, however that might be down to the clutch engagement point which as I later found when Ian Oddie dynoed the Pro Pipe was way too low. The dyno results are here http://www.mcdracingforum.com/forum/index.php?topic=2869.0

You are welcome to try my Pro Pipe with your engine.

Clive

[harryhackenbacker]

Clive I think you told me the original testing was done by Troll Racing ,where are they 

[printman]

Paul Mines a standard pipe !!!! thats  got to be the 4th time I told you now  

I take it you like the over run on the pipe   Maybe it'll get your new engine to run longer then 23 minutes in a 30 minute final 

[gixxerp]

you know me, i got the attention span of a gold fish  . perhaps if i didnt hoon round the track for 5 mins while i was waiting for you it would have done the 30 mins it wouldnt have mattered anyway you kicked my arse on sunday

[printman]

You'll get it sorted mate. Change those tyres too. Jason has a few still for sale
Can't wait for Nationals to start.
Plus I'm normal width now too. So level playing field 

[harryhackenbacker]

Wakey Wakey  http://www.rc-modelismo.com/Victory-Standard-Reso-fuer-MCD   
thats £155 delivered uk next day 

[printman]

Thanks Mike I've thrown him a text.

[harryhackenbacker]

Thanks Mike I've thrown him a text.

I think he works down a mine or something 

[gixxerp]

lol i had already seen that on modelismo, but cheers anyway chaps besides i have been advised to stick with the samba so might splash out on the new one with feet

[harryhackenbacker]

You going for a down or side exit samba with feet   down no problem ,but the side exit is further
forward then the old pipe ,so makes for needing a new /bigger exit hole in the shell ,and I don't
think the feet one is that good fitting wise ,It should be ,I put one on the rally ,but had to Insulate
the roll bar ,and bend it on the front mount ( home made )  ,to clear the radio box .
see my X4 out of the box post.

[gixxerp]

bloomin typical, how bloody hard is it to make a good fitting exhaust