MCD RACING FORUM
Trading Post => Wanted => Topic started by: Rover Man on June 22, 2011, 04:44:59 AM
-
Hey guys just wondered if anyone had one of these laying in the pit box
(http://i273.photobucket.com/albums/jj220/Team5hite/vrcmcd.jpg)
http://www.largescalerc.com/vrcsilencedpipeformcdracerunnerbaja1000rallycar.aspx (http://www.largescalerc.com/vrcsilencedpipeformcdracerunnerbaja1000rallycar.aspx)
Thanks
Dave
-
I have a brand new vrc pro pipe nib but i had it black chromed at a cost $300!!
-
I have a brand new vrc pro pipe nib but i had it black chromed at a cost $300!!
To expensive but thanks for the offer.
Just want one as a back up in case my Samba splits at a race..
-
lol :)
-
http://www.pitstop-shop.nl/ (http://www.pitstop-shop.nl/)
-
Dave, I have a spare tuned pipe you can try/borrow. It is the Pro pipe VRC pipe, I can't promise it will work with your engine but if you are stuck please let me know.
(http://img31.imageshack.us/img31/984/dscn0950b.jpg)
Clive
-
Dave, I have a spare tuned pipe you can try/borrow. It is the Pro pipe VRC pipe, I can't promise it will work with your engine but if you are stuck please let me know.
(http://img31.imageshack.us/img31/984/dscn0950b.jpg)
Clive
Thanks buddy ill let you know.
Just looking for a spare pipe (As in cheap ;)) as ive seen 3 samba's split in the same place now.
Mine looks ok at the moment but be a shame to be at a race for it too split and not have a spare.
Jase sell me yours for £40 after all the help i gave you at the weekend :lol: :lol: Oh and your shocks as well. ;)
-
pipe and shocks are staying on mine :P :P
did you like my hormann shocks when you had a go ?
-
Felt ok, Bit twitchy on the steering with the step studs on but i could get used to it, Ill have to got some coming for mine ;)
You just need some decent bumpers now 8)
And well done on your second place finish, Im sure you'll do even better at the nook..
Seems a great idea to have an On , Off switch instead of the normal type throttle :lol:
-
Seems a great idea to have an On , Off switch instead of the normal type throttle :lol:
?? ???
-
Throttle ON
:lol: :lol:
(http://i273.photobucket.com/albums/jj220/Team5hite/Jasemcd.jpg)
-
:lol: :D
i did have a little smile in that final , when there was 4 cars crashed in the jumps , cleared the lot of them :police:
-
:lol: :D
i did have a little smile in that final , when there was 4 cars crashed in the jumps , cleared the lot of them :police:
Heard about your OVERTAKING :lol: :lol: :lol:
-
Just found a pic of Jase's radio setup
(http://i273.photobucket.com/albums/jj220/Team5hite/b_3VCS.jpg)
;) ;)
-
I like that :lol:
-
Dave, the old Mielke MCD tuned pipe is another one to look out for, they were cheap new so should be peanuts for a used one. Guy Hayward used one in his V4 at the last Sweetnap national.
(http://img196.imageshack.us/img196/9649/img0168ni.jpg)
Do you need to change the stock V4 axles/hubs for the HPI Baja ones to mount the Elcon wheels? Both you and Jason are welcome to try my Ultimate wheels/KCR (medium) multispikes at the next national. I also have a set of used (once I think) and new step studs that you can have, they are the red (hard) compound and a nightmare to get on the wheels....
(http://img189.imageshack.us/img189/6245/img0148qq.jpg)
Clive
-
Back on the pipe thing ,that track and jump was extreme for large scale ,that what bust the pipes ??? :D normally they are fine
not even heard of an Australian breaking one :lol: :lol: :lol: mind they do run ceramic coated vic pipes mostly :D
-
Back on the pipe thing ,that track and jump was extreme for large scale ,that what bust the pipes ??? :D normally they are fine
not even heard of an Australian breaking one :lol: :lol: :lol: mind they do run ceramic coated vic pipes mostly :D
You haven't seen me drive mike , flat out lol
-
Back on the pipe thing ,that track and jump was extreme for large scale ,that what bust the pipes ??? :D normally they are fine
not even heard of an Australian breaking one :lol: :lol: :lol: mind they do run ceramic coated vic pipes mostly :D
You haven't seen me drive mike , flat out lol
So Evil Knievel it is then :lol: :lol:
-
Back on the pipe thing ,that track and jump was extreme for large scale ,that what bust the pipes ??? :D normally they are fine
not even heard of an Australian breaking one :lol: :lol: :lol: mind they do run ceramic coated vic pipes mostly :D
Nope, Seen one split the same way as jase's at Nene vally (No jumps there) Think Samba have changed to very thin steel.
-
Do you need to change the stock V4 axles/hubs for the HPI Baja ones to mount the Elcon wheels?
Clive
hi clive
not seen you at sweetnap for a while ?
yes you will need the baja wheel hex's , richard ran the Ultimate wheels on his v4 the weekend and they rub the rear hubs , but i dont know if he turned the top bolt round the other way
(http://i4.photobucket.com/albums/y105/evopower/2f883b00.jpg)
-
Back on the pipe thing ,that track and jump was extreme for large scale ,that what bust the pipes ??? :D normally they are fine
not even heard of an Australian breaking one :lol: :lol: :lol: mind they do run ceramic coated vic pipes mostly :D
You haven't seen me drive mike , flat out lol
So Evil Knievel it is then :lol: :lol:
just waiting for the video to come out lol
-
Hey guys just wondered if anyone had one of these laying in the pit box
(http://i273.photobucket.com/albums/jj220/Team5hite/vrcmcd.jpg)
http://www.largescalerc.com/vrcsilencedpipeformcdracerunnerbaja1000rallycar.aspx (http://www.largescalerc.com/vrcsilencedpipeformcdracerunnerbaja1000rallycar.aspx)
Thanks
Dave
You can try this one, is on the dutch large scale site:
http://www.rcbigscaleforum.nl/forum/viewtopic.php?f=20&t=20503 (http://www.rcbigscaleforum.nl/forum/viewtopic.php?f=20&t=20503)
-
Hey guys just wondered if anyone had one of these laying in the pit box
(http://i273.photobucket.com/albums/jj220/Team5hite/vrcmcd.jpg)
http://www.largescalerc.com/vrcsilencedpipeformcdracerunnerbaja1000rallycar.aspx (http://www.largescalerc.com/vrcsilencedpipeformcdracerunnerbaja1000rallycar.aspx)
Thanks
Dave
You can try this one, is on the dutch large scale site:
http://www.rcbigscaleforum.nl/forum/viewtopic.php?f=20&t=20503 (http://www.rcbigscaleforum.nl/forum/viewtopic.php?f=20&t=20503)
That would be great except i dont speak Dutch.
Can one of you guys who's registered on there ask if he'll post to the UK ????
-
Dutch - detected to English translation
beautiful in new condition PRC damper.
provides plenty of power (5.2 hp Zenoah standard).
weighs only 500 grams.
the best damper for the mcd at the moment.
fits inside the hood.
new price 179.00 pitstop.
Now shipping 75.00 ex.
mvg ronald
-
I have pm'd him a question about postage to the UK, so let you know when i know more...
-
I have pm'd him a question about postage to the UK, so let you know when i know more...
Thank you for your help ..
-
his answer :
hallo max
voor 75,00 pond stuur ik hem naar hem op.
laat me even weten wat hij wil.
als we een deal hebben mag hij me wel mailen.
dan zal ik hem mijn gegevens wel door mailen.
mij engels is niet zo best maar we zullen er wel uitkomen.
ik hoor het wel.
mvg ronald
rocketronny@hotmail.nl
He said he wants 75 pound shipped to you. If you agree , you can mail him directly at his email adress rocketronny@hotmail.nl to close the deal.
Succes.
-
E-Mail sent..
Many thanks for your help 8)
-
Hi guys, don't mean to hijack this thread. But I'm unable to start my own thread yet.
Couple of Q's:
A - Are the pipes for V3 and V4 same manifold lengths?
B - Anyone seen another one of these sexy VRC pipes for sale? Especially the Pro Pipe?
Cheers
-
Hi. As far as I know there the same length. What are you running, Evo 3 or V4 and where are you located?
-
i want a vrc pipe too=)
-
Hi. As far as I know there the same length. What are you running, Evo 3 or V4 and where are you located?
Based in UK, and am after a pro pipe for my Nutech.
If anybody see one kickin around, hollerrrrrr!! =)
-
Hi. As far as I know there the same length. What are you running, Evo 3 or V4 and where are you located?
Based in UK, and am after a pro pipe for my Nutech.
If anybody see one kickin around, hollerrrrrr!! =)
I still have a Pro pipe and I would be prepared to sell it but I can't see how it will fit a Nutech Thunderbolt.... If you don't have the engine is was designed for (OBR 27.2cc) I wouldn't bother, the low end is poor....
(http://img42.imageshack.us/img42/8256/img0250800x570.jpg)
(http://img51.imageshack.us/img51/738/img0251800x599.jpg)
(http://img819.imageshack.us/img819/2301/img0252800x555.jpg)
Clive
-
Hi bud, thanks for the pics.
How is the low end with the 27 fullmod?
-
Hi guys , have a look at this bargain I've just got !!!
http://www.largescaleforums.com/showthread.php?t=14062 (http://www.largescaleforums.com/showthread.php?t=14062)
Phil
-
yes you did get a bargain Phil :D
you can always slip me another tenner
K....
-
:lol: thanks mate ,
when ever i purchess things from you guys on here its always a bargin and in first class condition !!
phil...........................
-
:lol: thanks mate ,
when ever i purchess things from you guys on here its always a bargin and in first class condition !!
phil...........................
Thats the difference between Modelers and Muppets :lol: :lol: :lol: no seriously helps everyone ,life is easy
without strings ( oh s4it thats puppets ) :lol: :lol: